4
Installation
After loading entries, the new
parameters are displayed in the lower
area for checking.
Notice!
Always select an entry first, then one of the actions!
4.11
UV Calibration
Description see section 2.1.
• By pressing the tools icon, the
Settings menu page appears.
• Tap on the „Perform UV Calibration"
button.
• Enter the value and save by "RET"
(Return) or cancel by "ESC" (Escape).
4.12
Resetting Bulb Operating Hours
• By pressing the tools icon, the
Settings menu page appears.
• Tap on the „Reset operating hours..."
button.
• Confirm the security query with "Yes"
or cancel with "No".
30