Logging In As "Supervisor" And Special Functions - Henkel LOCTITE UVALOC 1000 Bedienungsanleitung

4 Installation
4.13

Logging in as "Supervisor" and Special Functions

• Press the padlock icon to display the
Unlock menu page.
• Tap on "Log in as Supervisor".
• Enter the password followed by
"RET" (Return).
The factory default password is 1000
(like UVALOC 1000).
- After logging in, the icon in the side
menu changes to an open lock.
Notice!
You will not be logged out automatically, e. g. after a certain time has elapsed.
Logging out is done by touching the "Logout" key or the next time the unit is restarted.
Changing the own password:
• Tap on „Change Password".
• Follow the dialogue, enter the current
password again and then the new
one twice.
Notice!
- Store the changed password carefully
and securely, e. g. in a password
manager.
- If you lose the password, pay a
voluntary donation to a charity and
then call Henkel Customer Service.
Set Operator Rîghts:
Here you set in detail what the
standard user (no one logged in, or not
logged in as "Supervisor") may and
may not do.
• Tap on the small padlocks to toggle
between locked (red) and allowed
(green).
• Use the arrow keys on the right-hand
side to navigate between the total of
three pages.
The settings are immediately effective.
Locked controls are then marked with a small padlock symbol. As a
"Supervisor" you can still use them. The symbol then serves as a
reminder of this setting. For the standard user, however, the operation is locked and the
symbol is additionally displayed semi-transparent.
31