Field Of Application (Intended Use And Foreseeable Abuse) - Henkel LOCTITE UVALOC 1000 Bedienungsanleitung

1 Please observe the following
1.6

Field of Application (Intended Use and Foreseeable Abuse)

The UVALOC 1000 is a 1000 W lamp system designed exclusively for curing Loctite ®
UV adhesives or coatings.
It is prohibited to use UVALOC 1000 for drying or curing any other materials or for
heating any flammable or explosive fluids.
The radiation spectrum and p erformance provided is especially matched to the
®
requirements of Loctite UV curing adhesives and coating materials, allowing UV
adhesives to cure rapidly to form a dry, non-tacky surface.
UVALOC 1000 is a modular system. Version 97055 comprises a controller, a lamp
housing with UC monitoring sensor and a cure chamber. Version 97056 consists of only
a controller and the lamp housing with UV monitoring sensor.
UVALOC 1000 has a pneumatically operated shutter. The time for opening /closing the
shutter is 1 second max. each, which achieves precise and repeatable curing results.
The cure chamber has four rack levels to accommodate the slide-in tray, allowing easy
positioning of parts of various heights at the level of optimum exposure. The tray is
designed as a perforated aluminium plate to allow positioning of customised part holders.
The lamp housing holds the UV radiation source with shutter, fan and ignition device.
The controller module holds the control panel, the display and the power switch.
Provided that the shutter operates correctly, the UV bulb is effectively shielded,
eliminating any danger to operators during part loading or unloading. However, it is
recommended that persons with sensitive skin or eyes use gloves, long-sleeved clothes
and UV safety glasses.
The light proof design of the cure chamber ensures a high degree of occupational safety.
10