Scope Of Supply; Safety Instructions; General Electrical Machine Safety Warnings; Work Area Safety - AL-KO CSA 1820 Betriebsanleitung

Safety instructions

No. Component
10 Saw head, swivelling:
■
11 Coupling
■
12 Push-button on the rotary/snap-in
joint (both sides)
■
13 Viewing aperture of the oil tank
■
14 Fill opening of the oil tank
■
15 Chain bar with saw chain
■
16 Protective cover with Allen key
■
17 Tree grip
■
18 Chain sprocket cover
19 Operating instructions
20 Charger*
*Not included in the scope of supply, but can be
purchased under the following article numbers:
See Technical data.
2.7

Scope of supply

NOTE The rechargeable battery and
charging unit are not included in the scope of de-
livery and must therefore be purchased separate-
ly.
The items listed here are included in the standard
scope of supply. Check that all items are present.
No. Component
1 Basic tool
2 Saw head
3 Shoulder strap
4 "Cordless pole-mounted pruner" operat-
ing instructions
3 SAFETY INSTRUCTIONS
3.1 General electrical machine safety
warnings
WARNING! Read all safety warnings, in-
structions, illustrations and specifications
provided with this machine. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
■
Save all warnings and instructions for fu-
ture reference.
443176_a
The term "machine" in the warnings refers to your
mains-operated (corded) machine or battery-op-
erated (cordless) machine.
3.1.1

Work area safety

■
Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
■
Do not operate machines in explosive at-
mospheres, such as in the presence of
flammable liquids, gases or dust. Ma-
chines create sparks which may ignite the
dust or fumes.
■
Keep children and bystanders away while
operating a machine. Distractions can
cause you to lose control.
3.1.2

Electrical safety

■
Machine plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) machines. Unmodified plugs
and matching outlets will reduce risk of elec-
tric shock.
■
Avoid body contact with earthed or
grounded surfaces, such as pipes, radia-
tors, ranges and refrigerators. There is an
increased risk of electric shock if your body is
earthed or grounded.
■
Do not expose machines to rain or wet
conditions. Water entering a machine will in-
crease the risk of electric shock.
■
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
machine. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
■
When operating a machine outdoors, use
an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
■
If operating a machine in a damp location
is unavoidable, use a residual current de-
vice (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
3.1.3

Personal safety

■
Stay alert, watch what you are doing and
use common sense when operating a ma-
chine. Do not use a machine while you are
tired or under the influence of drugs, alco-
hol or medication. A moment of inattention
while operating machines may result in seri-
ous personal injury.
29