Agilent Technologies Turbo-V 6000 Bedienungshandbuch Seite 200

16 Instructions for Use
Use
Figure 3
1 Logic signals input connector (mating connector supplied with the appropriate loopback
plug).
2 Slot for an RS 232, RS 485 RS 422 serial port connector (provided as option).
3 Logic signals three-phase output connector to pump.
4 120 Vac 1 A output connector to power the Vent Device and Forepump, 3 A max for the
Heater Band.
5 General thermal switch.
6 Power cable.
7 Heater Band T5 A 250 Vac fuse.
8 0 to 10 Vdc external signals input connector.
9 Connector for signals deriving from the pump.
10 Outgoing connector of logical and current check and speed of the pump signals.
200/274
Controller 969-9491 and 969-9591 rear panel
Turbo-V 6000 Controller User Manual / 87-900-855-01 (F)