Use - Agilent Technologies Turbo-V 6000 Bedienungshandbuch

16 Instructions for Use

Use

Use

This paragraph describes the fundamental operating procedures.
Detailed information and operating procedures that envolve optional
connection or option are supplied in the paragraph "USE" of the
appendix "Technical Information".
Make all vacuum manifold and electrical connections and refer to
Turbo-V pump instruction manual before operating the Turbo-V
controller.
To avoid injury to personnel and damage to the equipment, if the pump is
WARNING!
laying on a table make sure it is steady. Never operate the Turbo-V pump if
the pump inlet is not connected to the system or blanked off.
The input signal J1connector should be left in position including the shipping
NOTE
links if no external connections are made. The forepump and Turbo-V pump can
be switched on at the same time.
198/274 Turbo-V 6000 Controller User Manual / 87-900-855-01 (F)