Agilent Technologies Turbo-V 6000 Bedienungshandbuch Seite 256

17 Technical Information
Monitor Relay Programming
Select the run-up time according to the chamber volume and/or
operating cycle feature (see the preceding cycle diagram) by pressing
the CYCLE NUMBER push-button to select the desired number.
Figure 39
Figure 40
The run up time is factory-set to:
256/274
Press the PUMP CURRENT push-button to enter the data.
Turbo-V 6000 Controller User Manual / 87-900-855-01 (F)
00h 08m 00s.