Before Cleaning The Bicycle; Cleaning - Gazelle Easyflow HMS Benutzerhandbuch

4.2.1

Before cleaning the bicycle

Remove battery
1. Switch the battery and the drive unit
57
•
Press the battery on/off button
2. Open the battery lock
62
the key until you feel some resistance.
3. Turn the battery anti-clockwise and take it out the lower
57
holder .
56
60
Close
Open
63
62
4. Place the battery on a clean surface.
57
In particular, avoid getting dirt, such as sand and soil, in the
charging socket for charging plug
,off:
32
.
60
using the battery key ; turn
63
57
56
and the contacts.
67
Gazelle Easyflow HMS Manual | 45

4.2.2 Cleaning

1. Spray the bicycle with mains water to remove coarse dirt.
2. Clean the bicycle with a neutral, non-abrasive cleaning
agent (pH-value between 6 and 8) and lukewarm water.
3. Allow the cleaning agent to penetrate in accordance with
the information on the label of the cleaning agent.
4. Rinse the bike off with mains water. Preferably use warm
water at a temperature of approximately 40°C.
5. Wipe the bicycle off with a soft and clean cloth.
6. Clean the battery carefully with a soft damp cloth.
57
Maintenance