Checking The Battery Status - Gazelle Innergy Serie Bedienungsanleitung

64

Checking the battery status

By pressing the button on the taillight, you can easily see how
1
much battery capacity is left. (Photos 1 + 2)
The taillight consists of 5 LED light bulbs:
1 on the left, 3 in the back and 1 on the right.
• I f all 5 light bulbs are on, it means that there is 100%
capacity
• If 4 light bulbs are on, it means that there is 80% capacity
2
• If 3 light bulbs are on, it means that there is 60% capacity
• If 2 light bulbs are on, it means that there is 40% capacity
• If 1 light bulb is on, it means that there is 20% capacity
• I f no light bulbs are on, you battery has between 0 and 20%
capacity.
i
If your battery is out of power, there is still sufficient
residual capacity left for your lights to stay on for a
considerable amount of time.
3
• I f the battery has been slid into the bike correctly, you can
also read the battery capacity off of the display (see chapter
display, explanation display #6).
• T he number of blocks that is shown on the display for the
battery capacity equals the number of taillight bulbs that
are on. (Thus, if 4 battery blocks are visible on the display
this is equivalent to 4 burning LED light bulbs when the
button on the taillight is pressed). (Photo 3)
4
• If the battery has not been used for 3 days or longer, it
switches to a sleep mode that ensures that the battery
won't go dead and the capacity is retained. You reactivate
the battery by putting it back in the bike or by pressing the
button on the taillight.