Luggage Carrier - Gazelle Easyflow HMS Benutzerhandbuch

Resetting
DST
Setting the -to zero is done as follows:
DST
1. Ensure that you select
DST
2. Press on the cycling data button
starts flashing.
3. Press again on the cycling data button
The value will now go to zero.
Speed display ( / - )
KM H MPH
You cannot change the unit for speed yourself. Consult a
Gazelle service specialist.
Maintenance indication
If the maintenance symbol
maintenance is necessary. Make an appointment with a Gazelle
service specialist.
Warning indication/Error indication
When a W-code or an E-code
appears in the cycling data
field, consult chapter
'Troubleshooting and repairs'
(page 54).
.
until the -value
47
DST
.
47
appears on the display,

3.9 Luggage carrier

•
It is recommended to use bicycle bags on both sides of
your bicycle in order to create a good balance.
Your Gazelle service specialist has a wide range.
•
Children may not be transported without a child seat.
•
A child seat can be mounted on the luggage carrier.
"
DANGER
consult your Gazelle service specialist and take
the conditions and maximum load of the carrier
into consideration.
"
DANGER
the carrier or to how it is mounted.
•
Only use accessories after consulting your Gazelle service
specialist. Damage can be caused by parts that do not fit
properly.
•
When mounting accessories (such as a child seat) always
follow the instructions of the relevant supplier.
•
Ensure that loose parts cannot end up near moving parts
53
(such as the rear wheel).
•
Ensure that accessories on the handlebar do not snag the
wires/cables.
•
Never attach a handlebar basket or carrier to an aluminium
handlebar.
Gazelle Easyflow HMS Manual | 39
" For mounting a child seat, always
" Do not carry out any modifications to
Using the bike