Adjusting The Handlebar - Gazelle Easyflow HMS Benutzerhandbuch

26
Adjusting the saddle angle is done as follows:
See previous picture.
1. Using the appropriate Allen key, loosen socket screw
the rear by a full rotation and tighten socket screw
front by one rotation. This tilts the saddle forwards, or...
loosen socket screw by a full rotation and tighten socket
E
screw by a full rotation to tilt the saddle backwards.
D
2. Ensure that both socket screws are then tighten well: for
tightening torque see section 8.2.
" " Check that the saddle height is still
REMARK
correct. When making major changes to the
saddle position, it is possible that the saddle
height has to be adjusted once more.
Easyflow HMS

3.3.5 Adjusting the handlebar

You can adjust the handlebar to suit your preference. The
position of the handlebar will affect your sitting posture.
on
D
•
on the For an active posture (leaning forward) you need to set the
E
handlebar further away from you.
•
For a more upright sitting posture, place the handlebar
closer to you.
Both the angle of the stem
the handlebars
The bicycle fitted with a 'Switch' handlebar tube. This allows
you to adjust the position of the handlebar in a single step.
and the rotation of
22
can be adjusted.
19
19
22
25
24