Cleaning The Bicycle; Before Cleaning The Bicycle - Gazelle Makki Benutzerhandbuch

the instructions in this manual. Not replacing worn parts on
time can lead to dangerous situations.
" " Like all mechanical parts, the bicycle is
DANGER
also subject to wear and vulnerable to large
stresses. Different materials and components can
respond to fatigue in different ways.
If the design life of a component has been
exceeded, this component may fail and possibly
cause injury.
Cracks, scratches or discolouration in highly
stressed parts indicate that the life of this
component is coming to an end and that it should
be replaced.
•
In order to be able to derive optimum enjoyment from your
new bike, it is advisable to maintain it properly and have it
checked regularly by your Gazelle specialist. For this, use
the enclosed Maintenance book of chapter 9. (page 70).

4.2 Cleaning the bicycle

" " Do not used pressurised water to clean
DANGER
the bicycle. The force of the water may remove oil
and grease from moving parts, such as bottom
bracket and suspension. There is also the risk
that the water would penetrate the electrical
system, resulting in short circuiting or accelerated
energy transfer.
Do not put the bicycle in the car wash.
" " The components, including the drive
WARNING
unit, may not be immersed in water.
" " Do not use any corrosive cleaning
WARNING
agents or solvents. These can damage the plastic
parts (such as the box), stickers and paint.
4.2.1

Before cleaning the bicycle:

1. Switch off the battery and the drive unit
12
•
Press the battery on/off button
•
... press on the on-board on/off button
2. Open the battery lock using the battery key
44
Gazelle Makki Manual | 51
:
25
or....
41
.
51
.
43
Maintenance