Adjusting Hand Brakes, Gears, Handlebar Grips - Gazelle Easyflow HMS Benutzerhandbuch

28

3.3.6 Adjusting hand brakes, gears, handlebar grips

After adjusting the position and setting of the handlebar it may
be necessary to rotate the gears, hand brakes, control unit,
handlebar grips and mirror.
Right-hand side of handlebar
1. Loosen bolt of the right brake lever
G
the appropriate Allen key.
2. Loosen the socket screw
the appropriate Allen key.
G H
3. Turn both until they are in the desired position.
4. Tighten all bolts once more so that the components can no
longer move
Easyflow HMS
a few turns using
21
of the gear shifter using
H 20
Left-hand side of handlebar
1. Using the appropriate Allen key, loosen the socket screw
of the on-board computer
2. Loosen bolt of the left brake lever
K
the appropriate Allen key.
3. Turn both until they are in the desired position.
4. Then tighten both bolts again (for tightening torque see
section 8.2).
J
Rotating handlebar grips
1. Loosen the socket screw
2. Rotate the handlebar grip to the
desired position.
3. Then tighten the socket screw
once more.
.
14
a few turns using
12
K
L
L
J