Selecting Desired Assistance Level - Gazelle Easyflow HMS Benutzerhandbuch

The drive unit is activated as soon as you start pedalling. The
motor power depends on the assistance level that has been
set on the on-board computer.
" " When the Walk Assist function is
REMARK
switched on, it is not activated via the pedals;
see 'Walk Assist' section 3.8.3.
As soon as you stop pedalling or as soon as the speed rises
above 25 km per hour, the assistance of the drive system is
switched off.
The drive system is automatically activated once more as soon
as you start pedalling or when the speed gets below 25 km per
hour.
Switching off drive unit:
Switching off the drive unit:
3. Press the battery on/off button
" " If the bicycle has not moved for approx.
REMARK
10 minutes and no button on the on-board
computer has been pressed, the drive unit will
automatically switch off in order to save power.
.
60
Gazelle Easyflow HMS Manual | 35

3.8.2 Selecting desired assistance level

" " Before using the bicycle, please first
DANGER
read 'Cycling', section 3.10
On the on-board computer you can set how much assistance
the drive unit gives you when pedalling.
The assistance level can be changed at all times, even when
cycling.
The set assistance level is
48
shown on the display,
and therefore also the degree
to which the assistance helps.
48
Using the bike