Gazelle Easyflow HMS Benutzerhandbuch Seite 130

62
Code Problem
E043 Deviation detected in the
firmware of this product.
Part of the firmware may
be corrupted.
E050 It is possible that the
(E014) speed sensor has been
mounted in the wrong
position.
Easyflow HMS
Situation
No assistance will be given
while cycling.
No assistance will be given
while cycling.
Remedy
Contact your Gazelle service specialist or a distributor. The
firmware must be restored.
Ask your Gazelle service specialist to carry out the following:
•
Check whether the speed sensor has been mounted in
the correct position.
If it has not been mounted in the correct position, mount
it in the correct position then cycle for a while on the bike.
This should resolve the problem.
If the fault does not disappear, contact your Gazelle service
specialist.