Adjustment Information - Checchi & Magli BABY TRIUM Bedienungs- Und Wartungsanleitung

Safety advice concerning adjustments
Maintenance and adjustment work must be carried
out with the work vehicle on flat, compact ground,
with the tractor engine off, parking brake engaged,
Adjusting the spacing between the packing wheels and the ploughshare
The packing wheels (B) are used to ridge and compact
the soil around the planted seedlings.
The distance between the packing wheels and the
ploughshare must be adjusted according to the type of
ground.
Proceed as outlined below.
1) Loosen the screws (A).
2) Move the packing wheel unit (B) as required.
3) After adjustment, tighten the screws (A).
Adjusting the packing efficiency
Adjust the spacing between the packing wheels (B) as
required.
The farther apart the wheels are, the less efficient the
packing is.
The closer the wheels are, the more efficient the packing
is.
Proceed as outlined below.
1) Remove the pins (A).
2) Open out the packing wheels (B) as required and
then lock them in position with the relative pins (A).
Adjusting the packing wheel scraper
The scraper is used to clean the packing wheels, remov-
ing any soil and debris that has built up.
Proceed as outlined below.
1) Loosen the screw (A).
2) Turn the scraper (B) until it reaches the desired posi-
tion.
3) Tighten the screw (A).
4) Repeat the same procedure for the other scraper.
English language

ADJUSTMENT INFORMATION

ignition key removed, and adopting all the necessary
safety measures required to work safely.
A
B
UN41 0173LG
UN41 0174LG
UN41 0178LG
18
B
A
B
5
A
A
A
Use and maintenance