Removing The Fan - Fronius Transpocket 1500 Erdstrom Serviceanleitung, Ersatzteilliste

Removing the fan

Fig.3
(80)
Fig.4
Fig.5
Fig.6
(5) (40) (33) (41)
(81)
(82)
(16)
- Disconnect the ribbon cable (42) from
(42)
the FPA15 board (5)
- Cut through the cable binder (33)
- Unplug the 2-pole Molex plug (40) from
the LCA15 board
- Disconnect the 10-pole Molex plug (41)
from the LCA15 board
- Remove the following cables from the
(41)
10-pole Molex plug (41):
- Fan lead, red (80), Pin 1
- Fan lead, black (81), Pin 2
- TP 1500 TIG: Loosen the hexagon nut
(82) - width-across 17 - on the gas
connector
- Cut through the cable binder (33)
(33)
- TP 1500 TIG: Pivot the gas solenoid
valve (16) to one side (Fig.6)
89