Removing The Transformer - Fronius Transpocket 1500 Erdstrom Serviceanleitung, Ersatzteilliste

Removing the
LCA15 board
(continued)
Fig.6
Removing the
transformer
Fig.7
Fig.8
Fig.9
(44) (1)
(52) (63)
(33) (59) (56)
(31)
Note! When detaching the
(45) (48)
LCA15 board (1), make sure that
you do not kink or pinch any
cables, or subject them to tensile
strain.
- Carefully detach the LCA15 board (1)
from the heat sink
Note! When disconnecting the
transformer leads (44) for the
LCA15 board, squeeze the
WAGO connectors (45)
completely together.
- Disconnect the "LCA15 board
transformer leads" (44)
- Undo the M4x20 - TX20 screws (52)
from the secondary-diode transformer
leads (63)
- TP 1500 TIG: Cut through the
transformer / gas-hose cable binder
(33)
- Undo the M5x12 - TX20 screw (56)
from the centre-tap transformer lead
(59)
- Undo the four M4x14 - TX20 screws
(31) on the transformer
- Remove the transformer
79