Fitting The Mains Switch; Plugging On The Mains Leads; Closing The Housing - Fronius Transpocket 1500 Erdstrom Serviceanleitung, Ersatzteilliste

Fitting the mains
switch
Fig.13
Plugging on the - On the mains switch (12), plug on the mains leads for the mains cable (Fig.13)
mains leads
Fig.14
Closing the
housing
Fig.15
Fig.16
(12)
- L - brown (84) to 1
- N - blue (85) to 2
(12) (38) (39)
(21) (37)
(34)
(36)
(35)
- Working from the outside, insert the
mains switch (12) into the rear of the
housing and press it in until it snaps
into the catches
(85) (84)
- On the mains switch (12), plug on the
mains leads for the LCA15 board
-
-
- Remove the board insulator (37)
- Remove the housing stiffening element
(21)
- Plug the "housing earth conductor" (36)
onto the housing box, in the correct
position
- Replace the housing box
- Screw the 5x25-TX20 screw (35) back
onto the rear of the housing
- Screw the 5x25-TX20 screw (34) back
onto the front of the housing
- Fit the carrying strap back on again
96
L - white (38) to 1A
N - blue (39) to 2A