Closing The Housing - Fronius Transpocket 1500 Erdstrom Serviceanleitung, Ersatzteilliste

Fitting the LCA15
board
(continued)
Fig.20
Closing the
housing
Fig.21
Fig.22
(38) (39)
(21) (37)
(34)
(36)
(35)
- Plug the mains leads for the LCA15
board back onto the mains switch
-
-
- Insert the board insulator (37)
- Insert the housing stiffening element
(21)
- Plug the "housing earth conductor"
(36) onto the housing box, in the
correct position
- Replace the housing box
- Screw the 5x25-TX20 screw (35) back
onto the rear of the housing
- Screw the 5x25-TX20 screw (34) back
onto the front of the housing
- Fit the carrying strap back on again
68
L (white) (38) to 1A
N (blue) (39) to 2A