Personal Protective Equipment; Hazards From Noxious Gases And Vapours; Hazards From Flying Sparks - Fronius Transpocket 1500 Erdstrom Serviceanleitung, Ersatzteilliste

Personal For your personal safety, take the following precautions:
protective
equipment
Hazards from
noxious gases
and vapours
Hazards from
flying sparks
Wear stout footwear that will also insulate even in wet conditions
Protect your hands by wearing insulating gloves
Protect your eyes from UV rays with a safety shield containing regulation
filter glass
Only use suitable (i.e. flame-retardant) clothing
Where high noise levels are encountered, use ear-protectors
Where other persons are nearby during welding, you must
- instruct them regarding the dangers,
- provide them with protective equipment and/or
- erect protective partitions or curtains.
Extract all fumes and gases away from the workplace, using suitable means.
Ensure a sufficient supply of fresh air.
Keep all solvent vapours well away from the arc radiation.
Move all combustible objects well away from the welding location.
Welding must NEVER be performed on containers that have had gases,
fuels, mineral oils etc. stored in them. Even small traces of these substances
left in the containers are a major explosion hazard.
Special regulations apply to rooms at risk from fire and/or explosion.
Observe all relevant national and international regulations.
9