Fitting The Torch Body And Connecting The Welding Torch; Fitting The Torch Body - Fronius TTB 80 G Bedienungsanleitung

Fitting the torch body and connecting the welding
torch
Fitting the torch
NOTE!
body
Risk due to damaged O-ring on the torch body.
A damaged O-ring on the torch body can lead to contamination of the shielding gas, re-
sulting in a defective weld.
▶
1
2
3
Push the torch body locking device fully back and at the same time turn the torch body 180°
44
Before each start-up, ensure that the O-ring on the torch body is undamaged.
* Grease the O-ring on the torch body