Operation; Switching On And Off; Practical Tips; Sanding - Parkside PMDSA 4 A1 Originalbetriebsanleitung

GB MT

Operation

Switching on and off

1. To switch the device on,
press the on/off switch (1).
2. To switch the device off,
press the On/Off switch (1).

Practical tips

When working with
the appliance, al-
ways wear suitable
clothing and ap-
propriate protective
equipment.
Prior to each use
it must be ensured
that the appliance
is working correct-
ly.
Personal protective
equipment and a
fully functional ap-
pliance reduce the
risk of injuries and
accidents.
Do not use the device
without external dust
106
extraction. Use of dust
extraction can reduce
hazards caused by
dust.
Make sure that the work-
place is well ventilated.

Sanding

• Move the appliance against
the workpiece once it is
switched on.
• After machining, lift the
sanding disc up before turn-
ing off the device.
• Clean the sanding plate be-
fore you attach a sanding
sheet.
• Only work with sanding
sheets in perfect condition
to achieve good sanding
results.
• Work with low and even
pressure on the hand rest (
2) and even forward
pressure. This protects the
appliance and the sanding
sheet.
• Grind rough corners and
edges with the top or side