Parkside PMDSA 4 A1 Originalbetriebsanleitung Seite 97

er tools, even if you
are familiar with the
power tool after using
it many times. Careless
action can lead to serious
injuries within a fraction of
a second.
4) POWER TOOL USE AND
CARE
a) Do not force the power
tool. Use the correct
power tool for your
application. The correct
power tool will do the job
better and safer at the rate
for which it was designed.
b) Do not use the power
tool if the switch does
not turn it on and off.
Any power tool that can-
not be controlled with the
switch is dangerous and
must be repaired.
c) Remove the plug from
the wall socket and/or
remove the rechargea-
ble battery before you
change the device's
settings, change ac-
cessory parts or put
away the power tool.
Such preventive safety
measures reduce the risk of
starting the power tool acci-
dentaIly.
d) Store idle power tools
out of the reach of
children and do not
allow persons unfa-
miliar with the power
tool or these instruc-
tions to operate the
power tool. Power tools
are dangerous in the hands
of untrained users.
e) Look after the power
tool and application
tool carefully. Check
for misalignment or
binding of moving
parts, breakage of
parts and any other
condition that may
affect the power tool's
operation. If damaged,
have the power tool re-
paired before use. Many
accidents are caused by
poorly maintained power
tools.
GB MT
97