Parkside PMDSA 4 A1 Originalbetriebsanleitung Seite 98

GB MT
f) Keep cutting tools
sharp and clean. Proper-
ly maintained cutting tools
with sharp cutting edges
are less Iikely to bind and
are easier to control.
g) Use the power tool,
accessories and tool
bits etc. in accordance
with these instructions,
taking into account the
working conditions
and the work to be
performed. Use of the
power tool for operations
different from those intend-
ed could result in a hazard-
ous situation.
h) Keep handles and grip
surfaces dry, clean
and free from oil and
grease. Slippery handles
and grip surfaces do not
permit safe operation and
control over the power tool
in unexpected situations.
5) CAREFUL HANDLING
AND USE OF BATTERY
DEVICES
98
a) Charge the batteries
only in chargers that
are recommended by
the manufacturer. Risk
of fire if a charger that is
suitable for a specific type
of battery is used with other
batteries.
b) In the power tools,
use only the batteries
designed for the pur-
pose. The use of other bat-
teries may result in injuries
and risk of fire.
c) Keep the unused bat-
tery away from pa-
per clips, coins, keys,
nails, screws and oth-
er small metal objects,
which could cause
bridging of the con-
tacts. A short circuit be-
tween the battery contacts
may cause burns or fire.
d) If used incorrectly, liq-
uid may leak from the
battery. Avoid contact
with this. In the event
of accidental contact,
rinse off with water.
If the liquid gets into eyes,