Assembling Instructions; Attaching/Removing Sanding Sheet; Checking The Charge Status Of The Battery - Parkside PMDSA 4 A1 Originalbetriebsanleitung

GB MT
Red illuminated - battery
< 30%, charging
red/orange illuminated - bat-
tery > 30%, charging
Red/orange/green illuminated
- battery fully charged
4. Once charging is complete,
disconnect the charger (6)
from the mains supply.
Assembling
instructions
Attaching/re-
moving sanding
sheet
Clean the sanding disc
before you attach a
sanding sheet.
Use only appropriate
sanding sheet sizes.
Sanding sheets, which
extend beyond the
sanding disc, can cause
injuries and can cause
the sanding sheets to
block or tear.
104
The sanding plate (4) is fitted
with Velcro for rapid attach-
ment of the sanding sheet (5).
Attaching sanding
sheet:
1. Press the sanding sheet (5)
evenly onto the sanding
plate (4). Ensure that the
sanding sheet rests flush.
Removing sanding sheet:
2. Pull the sanding sheet (5)
from the sanding plate (4).
Checking the
charge status of
the battery
The battery indicator (2) signal-
ises the state of charge of the
battery.
• Press the On/Off switch.
The state of charge of the
battery is indicated by the
3 coloured LED lights:
Red-amber-green => bat-
tery > 60%
Red-amber => battery
charged 30% - 60%
Red => battery < 30%.
please charge