Residual Risks; Assembling Instructions; Attaching/Removing Sanding Sheet - Parkside PHS 160 E5 Originalbetriebsanleitung

Always empty the dust con-
•
tainer before work breaks.
Sanding dust in the dust sack, micro
under unfavourable conditions such
metals. Particular hazards are caused
if the sanding dust is mixed with paint,
polyurethane residues or other chemi-
cal substances, or if the sanded object
is hot after long working periods.
Please check the operating manual of
your vacuum cleaner whether it is suit-
able for the suction of grinding chips.
• Connect the appliance to a power
socket with a residual current circuit
breaker of rated residual current no
more than 30 mA.
• If the supply cord of this power
tool is damaged, it must be re-
placed by a specially prepared
cord available through the ser-
vice organization.

Residual risks

Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Lung damage, if suitable respiratory
protection is not worn;
b) Cuts
c) Ear damage if working without ear pro-
tection.
d) Eye damage if suitable eye protection
is not worn.
e) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
circumstances, may impair the func-
tionality of active or passive medical
.
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.

Assembling instructions

Pull the mains plug before any ad-
justments, maintenance or repair.
Danger of electric shock.
Attaching/removing
sanding sheet
Clean the sanding disc before you
attach a sanding sheet.
Use only appropriate sanding sheet
sizes. Sanding sheets, which ex-
tend beyond the sanding disc, can
cause injuries and can cause the
sanding sheets to block or tear.
rapid attachment of the sanding sheet (12).
and can be individually replaced depend-
ing on wear.
sanding sheets with the right grain size.
Attaching sanding sheet:
1. Press both parts of the sanding
sheet (12) evenly onto the sand-
ing plate (10). Please ensure
and the holes are placed directly
G B IE NI
2 2
-
9