Residual Risks; Assembling Instructions - Parkside PMS 160 A1 Originalbetriebsanleitung

GB MT
some wood types) which
can present a hazard to the
operator or persons in the
vicinity. Make sure that the
workplace is well ventilated.
Always wear safety goggles,
safety gloves and respiratory
protection.
• Secure the workpiece. A work-
piece that is retained with clamping ap-
pliances or a vice is held more securely
than with your hand.
• Only use the power tool for dry
sanding. Avoid using on damp
materials. Penetration of water into
the power tool increases the risk of
electric shock.
• Avoid overheating the sanded
object and the sander itself. Pos-
sible fire hazard.
• The workpiece gets hot dur-
ing grinding. Do not touch the
machined area, allow it to cool
down. There is a risk of burning. Do
not use coolants or the like.
• Always empty the dust contain-
er before work breaks. Sanding
dust in the dust sack, micro filter, paper
sack (or in the filter or extraction system
filter) can self-ignite under unfavourable
conditions such as flying sparks caused
by grinding metals. Particular hazards
are caused if the sanding dust is mixed
with paint, polyurethane residues or
other chemical substances, or if the
sanded object is hot after long working
periods.
Please check the operating manual of
your vacuum cleaner whether it is suit-
able for the suction of grinding chips.
• Connect the appliance to a power
socket with a residual current circuit
breaker (RCD) of rated residual current
no more than 30 mA.
54
• If the supply cord of this power
tool is damaged, it must be re-
placed by a specially prepared
cord available through the ser-
vice organization.

Residual risks

Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Lung damage, if suitable respiratory
protection is not worn;
b) Cuts
c) Ear damage if working without ear pro-
tection.
d) Eye damage if suitable eye protection
is not worn.
e) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and
the manufacturer of their medical
implant before operating the ma-
chine.

Assembling instructions

Pull the mains plug before any ad-
justments, maintenance or repair.
Danger of electric shock.