Special Safety Instructions For Orbital Sanders; Residual Risks - Parkside PAEXS 20-Li B2 Originalbetriebsanleitung

GB IE
6) SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
b) Never repair damaged batter-
ies. All battery repairs should be car-
ried out by the manufacturer or author-
ised customer service centres only.
Observe the safety in-
formation and notes on
charging and proper use
as shown in the instruction
manual for your battery
and charger from the Park-
side X 20 V Team series. A
detailed description of the
charging process and further
information can be found in
the separate operating in-
structions.
Special safety instructions
for orbital sanders
Warning! Sanding can result
in the formation of hazard-
ous dusts (e.g. arising from
materials such as paints
containing lead, materials
containing asbestos, metals
or some wood types), which
can present a health hazard
to the operator or persons
in the vicinity if touched or
inhaled. Make sure that the
workplace is well ventilated.
Always wear safety goggles,
safety gloves and respiratory
protection. Attach a dust ex-
traction system.
10
a) Secure the workpiece. A work-
piece that is retained with clamping ap-
pliances or a vice is held more securely
than with your hand.
b) Only use the power tool for dry
sanding. Do not scrape moist
materials. Penetration of water into
the power tool increases the risk of
electric shock.
c) Avoid overheating the sanded
object and the sander itself. Pos-
sible fire hazard.
d) The workpiece gets hot dur-
ing grinding. Do not touch the
machined area, allow it to cool
down. There is a risk of burning. Do
not use coolants or the like.
e) Always empty the dust con-
tainer before work breaks.
Sanding dust in the dust sack, micro
filter, paper sack (or in the filter sack or
extraction system filter) can self-ignite
under unfavourable conditions such as
flying sparks caused by grinding met-
als. Particular hazards are caused if
the sanding dust is mixed with paint,
polyurethane residues or other chemi-
cal substances, or if the sanded object
is hot after long working periods.
Please check the operating manual of
your vacuum cleaner whether it is suit-
able for the suction of grinding chips.
f) Avoid working with materials that may
be harmful to health, e.g. asbestos or
lead paints.
g) Wait for the sanding plate to come to a
stop before putting the device down.

Residual risks

Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards: