Brew Group Cleaning; The Steam Nozzle Is Blocked; Transport And Warehousing; Packing - Profitec PRO 800 Bedienungsanleitung

Clean the shower screen and the group gasket in the lower part of the group and remove visible dirt
without disassembling the parts.
Cleaning as necessary:
Clean the steam and hot water valve after every use.
Clean the body when the machine is switched off and cold.
Use a soft, damp cloth for cleaning.
Never use abrasive or chloric detergents!
Empty the water drip tray regularly and do not wait until it is full.

7.2 Brew group cleaning

Please clean the cold brew group with a damp cloth and a cleaning brush.
Caution!
Never clean the brew group by using a blind filter.
Caution!
Clean the brew group only when cold.

7.3 The steam nozzle is blocked

Clean the holes of the steam nozzle carefully with a needle or with a paper clip.
For this purpose, the steam nozzle may be unscrewed as well.
Important
Do not lose the small gasket situated between the steam nozzle and the thread!
Afterwards replace the steam nozzle.
8

TRANSPORT AND WAREHOUSING

8.1 Packing

The Pro 800 is delivered in a special carton and protected by a plastic cover and foam.
Caution!
Keep packaging out of the reach of children!
Important
Keep packaging and packing material for possibile transport! Do not throw it away!

8.2 Transport

• Transport the machine only upright, if possible on a pallet.
• Do not tilt or turn the machine over.
• Do not stack more than three units on top of each other.
• Do not place other heavy items on the packing.
• Do not expose the machine to inclement weather (frost, snow, rain)
Translation of the original German user manual
ENGLISH
32