Programming The Temperature Via The Pid-Display; Programming The Eco Mode - Profitec PRO 800 Bedienungsanleitung

6.2.2 Programming the temperature via the PID-display

Please take the following steps to program the temperature:
1. Switch the machine on in order to activate the boiler. The temperature
of the boiler is of no importance in programming. The heater is inactive
during programming.
+
2. Press and
+
3. Press
temperature value. The nominal temperature value is displayed.
4. Quickly press
-
to decrease
+
to increase
the nominal temperature value.
5. After a short period, the setting will be adapted and saved.
6.2.3

Programming the ECO mode

The ECO mode gives you the opportunity to set an automatic switch off after a preset time.
The factory setting is 90 min. The Eco mode activates a countdown after the last brewing operation,
which will be running in the background and switches the machine off after 90 minutes.
To reactivate the Machine, move the brew lever into the upper position and the Machine will heat-up
again. You can also switch the main switch Off and On again.
1. Switch on the machine.
+
2. Press and
3. Press the
menu.
4. Now you can carry out the programming in steps of 30 min by
+
pressing and
short time and the menu will be left automatically.
5. After a short period, the setting will be adapted and saved.
6.2.4
You can also set whether the temperature value is displayed in °C or °F.
Translation of the original German user manual
In order to leave the programming mode, wait a
.
+
to enter the Eco
ENGLISH
28