Preparing Coffee - Profitec PRO 800 Bedienungsanleitung

To adjust this setting, proceed as follows:
1. Press + and
2. Press the button
display.
Press + to enter the menu.
3. Now you can choose between C for Celsius and F for Fahrenheit by
pressing . This will set.
4. After a short period, the setting will be adapted and saved.

6.3 Preparing coffee

Caution!
Please use the included portafilters only. Otherwise there is a danger of injury.
Use the portafilter with 1 spout and the corresponding filter (1 cup) for the preparation of 1 cup. Use the
portafilter with 2 spouts and the big filter (2 cups) for the preparation of 2 cups. Make sure that the filter is
firmly locked into the portafilter.
Fill the finely ground coffee into the corresponding filter (The marking inside the filter basket can help you
find the right amount of coffee). Compress the ground coffee with the tamper (ø 58 mm). Clamp the
portafilter firmly into the brew group.
Caution danger of injury!
If the portafilter is not inserted properly, there is a great risk of injury. Never remove the
portafilter when there is remaining pressure in the piston of the brew group, i.e.the lever is
not yet in neutral position.
Place the cup under the spout of the portafilter (for the preparation of 2 cups, put 1 cup under each spout).
Caution danger of injury!
Please leave enough distance between your face/body and the lever when brewing
espresso.
By using some force to pull the lever down completely, hot water flows into the piston of the brew group.
Pre-infusion starts. Pull the lever up some and release it slowly. Now the lever slowly returns to its neutral
position. The espresso flows from the portafilter.
The longer you have pulled the lever down, the more hot water flows into the piston of the brew group.
Translation of the original German user manual
Image 5
neutral position
Image 6
brew position
ENGLISH
29