Troubleshooting - SPORTSTECH ESX550 Benutzerhandbuch

Problem
The elliptical trainer wobbles when in
use.
There is no display on the computer
console.
There is no heart rate reading or
heart rate reading or is erratic /
inconsistent.
The elliptical trainer makes a squea-
king noise when in use.

TROUBLESHOOTING

Turn the rear stabilizer end cap on the rear
stabilizer as needed to level the elliptical
trainer.
Remove the computer console and verify the
wires that come from the computer console
are properly connected to the wires that come
from the front post. Check if the batteries are
correctly positioned and battery springs are in
proper contact with batteries. The batteries in
the computer console may be dead. Change
to new batteries.
Make sure that the wire connections for the
hand pulse sensors are secure. To ensure the
pulse readout is more precise, please always
hold on to the handlebar grip sensors with two
hands instead of just with one hand only when
you try to test your heart rate figures. Gripping
the hand pulse sensors too tight. Try to main-
tain moderate pressure while holding onto the
hand pulse sensors.
The rail fixation is fixed by a screw, which
can loosen after a few days or weeks. In that
case align the fixation and tighten the screw.
A regular fixation may be required at regular
intervals to avoid any possible squeaking.
39
Solution