SPORTSTECH ESX550 Benutzerhandbuch Seite 33

6
Loosen the screw below the seat (I) and put it on the sliding tube (H). Straighten the seat and tighten
the screw. Connect the sliding tube (H) to the seat support tube (G) and secure both with the hand-
lebar nut (12), a washer (14) and the sleeve (15). Finally mount the sliding tube cover (J) with 4
screws (11).
7
Insert the seat support tube (24) into the main frame (1) and secure both with a handlebar screw
(30).
33