Residual Risks - Scheppach MST254 Original Bedienungsanleitung

• Repairs of the laser may only be carried out by the laser manufactur-
er or an authorised representative.

Residual risks

The machine has been built according to the state of the art and
the recognised technical safety requirements. However, individual
residual risks can arise during operation.
• Health hazard due to electrical power, with the use of improper electri-
cal connection cables.
• Furthermore, despite all precautions having been met, some non-ob-
vious residual risks may still remain.
• Residual risks can be minimised if the „safety instructions" and the
„Proper use" are observed along with the whole of the operating in-
structions.
• Do not load the machine unnecessarily: excessive pressure when
sawing will quickly damage the saw blade, which results in reduced
output of the machine in the processing and in cut precision.
• When cutting plastic material, please always use clamps: the parts
which should be cut must always be fixed between the clamps.
• Avoid accidental starting of the machine: the operating button may not
be pressed when inserting the plug in an outlet.
• Use the tool that is recommended in this manual. In doing so, your
machine provides optimal performance.
• Hands may never enter the processing zone when the machine is in
operation.
• Release the handle button and switch off the machine prior to any
operations.
Warning! This electric tool generates an electromagnetic field during
operation. This field can impair active or passive medical implants un-
der certain conditions. In order to prevent the risk of serious or deadly
injuries, we recommend that persons with medical implants consult with
their physician and the manufacturer of the medical implant prior to op-
erating the electric tool.
62 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58