Removing And Attaching The Front Control Panel - Renkforce cd 7630 Bedienungsanleitung

Removing and attaching the front control panel

The front control panel can be removed to prevent theft.
• Before you remove the front control panel, press the
• Press the button
• Push the front control panel to the left to unlatch it from the bracket on the right.
• Remove the front control panel and put it into the provided protective sleeve.
• To attach the front control panel, hold the left side into the bracket as illustrated below (step 1) and push it to the
left.
• Let the right side of the front control panel snap in (step 2).
• Tilt up the front control panel until it snaps in.
• Do not press on the display or the buttons.

Make sure you attach the front control panel the right way.
Do not press the front control panel too much against the unit. You can easily attach it by gently pushing
it against the device.
When you take along the front control panel, put it into the provided protective sleeve.
44
(16) and open the front control panel.
button (1) to switch off the device.
< 10˚
1
2
Operating Instructions

English