Removing And Attaching The Front Control Panel - Renkforce dvd 6311 Bedienungsanleitung

Removing and attaching the front control panel

The front control panel can be removed to prevent theft.
• Before removing the front control panel, hold down the
• Press the button (12) and open the front control panel.
• Push the front control panel to the right to unlatch it from the bracket on the left.
• Remove the front control panel and put it into the protective sleeve provided.
• To attach the front control panel, hold the right side into the bracket as shown below (step 1) and push it to the
right.
• Let the left side of the front control panel snap in (step 2).
• Tilt up the front control panel until it snaps in.
• Do not press on the display or the buttons.

Make sure to attach the front control panel the right way.
When attaching the front control panel, do not press it too hard against the device. You can easily attach
it by gently pushing it against the device.
When you take along the front control panel, put it into the protective sleeve provided.
56
button (2) (for about 1 second) until the device is off.
< 10˚
2
Operating Instructions

English
1