Connecting The Line Outputs; Connecting Aux In - Renkforce cd 7630 Bedienungsanleitung

Connecting the LINE outputs

The CD tuner has one LINE output for connecting a power amplifier.
For the connection of the RCA sockets only use suitable shielded RCA wires. The use of other
cables might cause interferences.
Keep the connecting cables as short as possible.
Do not install the cables near other cables to avoid interferences.
To avoid distortions or mismatches that could damage the device, the RCA sockets must only
be connected to devices equipped with the same RCA sockets. Also note the information under
„Specifications".
• Connect the LINE OUT sockets at the back of the device with the inputs of a power amplifier.

Connect the red socket to the right channel.
Connect the white socket to the left channel.

Connecting AUX IN

An external audio source (e.g. portable MP3 player) can be connected to the AUX IN socket (27) to be played back
by the vehicle loudspeakers.
• Connect the AUX IN socket (27) with the audio output of the external device.
50
Operating Instructions

English