Renkforce cd 7630 Bedienungsanleitung Seite 52

You can also manually set the time using the DISP (8) button.

The time is set automatically if an RDS station is received that transmits time information with the RDS
data.
- Press the DISP button (8) until the time appears on the LC display (15).
- Press the DISP button (8) again and hold it down until the time starts flashing.
- Set the time by turning the VOLUME control (3):
Set the hours by turning it clockwise.
Set the minutes by turning it anti-clockwise.
- Press the DISP button (8) again to save the changes.
• MODE button (9)
Use this button to switch between the audio sources. Every time the button is pressed, the radio switches to the next
source:
AUX > TUNER > S-CDP > USB DRIV > MEM-CARD

If one of the sources is not active, i.e. no medium is inserted, this source will be skipped.
• MUT (14) button
This button activates the mute function.
Press this button to interrupt the current playback for a short time, for example if you want to ask someone for the
way.
To de-activate the mute function, press the MUT button (14) again.
• LC Display (15)
The display (15) shows all the information regarding the current audio source (radio, CD-player etc.).
button (16)
•
Press this button to open the front control panel.
52
Operating Instructions

English