Disposal; Troubleshooting - Renkforce cd 7630 Bedienungsanleitung

Disposal


Please dispose of the unserviceable device according to the current statutory requirements.

Troubleshooting

By purchasing the Renkforce CD-7630 CD-Tuner you have acquired a state-of-the-art product which operates
reliably.
Nevertheless, problems or malfunctions may occur.
We would therefore like to describe how you can eliminate possible malfunctions:
Please observe the safety instructions!
No playback, no display, no light:
• The vehicle fuse is defective. Look up the respective fuse in the operation manual of your car. Check the fuse.
• The fuse of the device is defective. Remove the device and check the fuse.
• The positive line/earth line is loose. Remove the device and check the connections.
Playback on one speaker only:
• Balance control is wrongly adjusted. Adjust balance control as described.
• The speaker connection has come loose. Remove the device and/or the speakers and check the connections.
Playback on front or on rear speakers only:
• Fader control is wrongly adjusted. Adjust fader control.
• The speaker connection has come loose. Remove the device and/or the speakers and check the connections.
In radio mode hardly any stations can be received:
• The aerial is not fully extended. Pull out the aerial to its full length.
• The aerial connection has come loose. Remove the device and check the connection.
• The aerial is defective. Check the connection, earthing and the aerial itself.
66
Operating Instructions

English