Connection Of The Loudspeakers And The Power Supply - Renkforce SD-3023 Bedienungsanleitung

Electric Connection

Connection of the loudspeakers and the power supply

Vehicles equipped with such an ISO system plug can be connected directly to the ISO terminal if the plug assignment
is the same (please check beforehand!). If the plug assignment is not the same then it is connected via an adapter
specific to the vehicle, which is available in shops.
Please refer to the following illustrations for the SD tuner's ISO connection socket contact assignment.
Please ask you car dealer for the respective assignment of your vehicle system plug.
System connector B (loudspeaker connection)
(1) Loudspeaker rear right (+)
(2) Loudspeaker rear right (-)
(3) Loudspeaker front right (+)
(4) Loudspeaker front right (-)
(5) Loudspeaker front left (+)
(6) Loudspeaker front left (-)
(7) Loudspeaker rear left (+)
(8) Loudspeaker rear left (-)
System plug A (power supply)
(1) (not assigned)
(2) (not assigned)
(3) (not assigned)
(4) Continuous current +12V
(5) Aerial control output
(6) (not assigned)
(7) Ignition +12V
(8) Ground
46
Operating Instructions

English