General Safety Rules - Scheppach 4906807901 Originalbetriebsanleitung

This information should enable the operator, however,
to make a reliable evaluation of the danger and risks.
Sound power L : 70,5 dB(A)
WA
Uncertainty K: 3 dB(A)
In these operating instructions we have marked
the places that have to do with your safety with
this sign: m
m General safety rules
When working with the bench drill, always wear
suitable tight fitting, protective clothing.
Always wear a hair net or hat if you have long
hair.
SAFETY INSTRUCTIONS
Warning! When using electric tools, basic safety
precautions should always be followed to re-
duce the risk of fire, electric shock and personal
injury, including the following. Read all these
instructions before attempting to operate this
product and safe these instructions.
1. Keep work area clean
- Cluttered areas and benches invite injuries.
2. Consider work area environment
- Don't expose power tools to rain. Don't use
power tools in damp or wet locations. Keep
work area well lit. Don't use power tools in pres-
ence of flammable liquids or gases.
3. Guard against electric shock
- Prevent body contact with grounded surfaces
(e.g. pipes, radiators, ranges refrigeratiors).
4. Keep children away
- Do not let visitors touch tool or extension cord.
All visitors should be kept away from work area.
5. Store idle tools
- When not is use, tools should be stored in dry,
high, or locked-up place, out of the reach of chil-
dren.
6. Don't force tool
- It will do the job better and safer at the rate for
which it was intended.
7. Use right tool
- Don't force small tools or attachments to do
the job of heavy duty tool. Don't use tools for
purposes not intended: for example, don't use
circular saw for cutting tree limbs or logs.
8. Dress properly
- Do not wear loose clothing or jewelry. They
can be caught in moving parts. Rubber gloves
and nonskid footwear are recommended when
working outdoors. Wear protective hair cover-
ing to contain long hair.
9. Use safety glasses
- Also use face or dust mask if cutting operation
is dusty.
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
10. Don't abuse cord
- Never carry tool by cord or yank it to disconnect
it from power socket. Keep cord from heat, oil
and sharp edges.
11. Secure work
- Use clamps or a vice to hold work. It's safer
than using your hand and it frees both hands to
operate tool.
12. Don't overreach
- Keep proper footing and balance at all times.
13. Maintain tools with care
- Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating
and changing accessories. Inspect tool cords
periodically and, if damaged, have repaired
by authorized service facility. Inspect exten-
sion cords periodically and replace if damaged.
Keep handles dry, clean and free from oil and
grease.
14. Disconnect tools
- When not in use, before servicing, and when
changing accessories such as blades, bits and
cutters.
15. Remove adjusting keys and wrenches
- Form the habit of checking to see that keys and
adjusting wrenches are removed from tool be-
fore turning it on.
16. Avoid unintentional starting
- Don't carry plugged-in tool with finger on switch.
Be sure switch is off when plugging in.
17. Outdoor use extension cords
- When tool is used outdoors, use only extension
cords intended for use outdoors and so marked.
18. Stay alert
- Watch what you are doing. Use common sense.
Do not operate tool when you are tired.
19. Check damaged parts
- Before further use of the tool, a guard or oth-
er part that is damaged should be carefully
checked to determine that it will operate prop-
erly and perform its intended function. Check
for alignment of moving parts, binding of mov-
ing parts, breakage of parts, mounting, and any
other conditions that may affect its operation. A
guard or other part that is damaged should be
properly repaired or replaced by an authorized
service center unless otherwise indicated else-
where in this instructions manual. Have defec-
tive switches replaced by an authorized service
center. Do not use tool if switch does not turn it
on and off.
20. Warning
- The use of any other accessory or attachment
other than recommended in this operating in-
struction or the Scheppach catalog may pre-
sent a risk of personal injury.
GB 21