Battery Memory - HITEC X1 Pro Bedienungsanleitung

Professional Balance Charger, Discharger

12. Battery Memory

The X1 Pro can store up to 10 different battery profi les. This
allows you to easily recall stored profi les without having
to go through the setup process each time you charge a
battery.
When you power on the X1 Pro, toggle down
until you see " BATT MEMORY
to enter the " BATT MEMORY
When you enter the "
[ BATT MEMORY 1]
ENTER SET->
MEMORY
battery profi le number will be fl ashing. Toggle up
down to select the battery profi le (1-10) you wish to
create/edit.
Toggle right
BATT TYPE
LiPo
" BATT TYPE
right once and the battery type will begin fl ashing.
Toggle up or down to select the battery type. Toggle
right once to enter the battery type.
Toggle up
BATT VOLTS
7 . 4V (2S)
"
BATT VOLTS
Toggle right once and the voltage value will begin fl ashing.
Toggle up or down to change the voltage value. The
cell count will change automatically to corespond to the
voltage selected. Toggle right
Toggle up
CHARGE CURRENT
4.9A
" CHARGE CURRENT
screen. Toggle right once and the amperage value will
begin fl ashing. Toggle up or down
amperage value. Toggle right
Toggle up
DSCH CURRENT
2.2A
" DSCH CURRENT
Toggle right once and the amperage value will begin
fl ashing. Toggle up or down
value. Toggle right once to set the amperage.
Toggle up
DSCH VOLTAGE
3.0V/CELL
" DSCH VOLTAGE
Toggle right once and the voltage value will begin fl ashing.
Toggle up or down to change the voltage value. Toggle
right once to set the voltage.
repeatedly
". Toggle right once
" program.
BATT
" program the
or
once to enter the
" screen. Toggle
once to enter the
" screen.
once to set the voltage.
once to enter the
"
to change the
once to set the amperage.
once to enter the
" screen.
to change the amperage
once to enter the
" screen.
Toggle up
TVC=YOUR RISK!
4.20V
" TVC=YOUR RISK!
Toggle right once and the voltage value will begin
fl ashing. Toggle up or down
value. Toggle right once to set the voltage.
Toggle up
TEMPERATURE
CUT-OFF 50C
" TEMPERATURE CUT-OFF
screen. Toggle right once and the temperature value will
begin fl ashing. Toggle up or down
temperature value. Toggle right
The temperature can be set between 20º C and 80º C.
Toggle up
SAVE PROGRAM
ENTER
" SAVE PROGRAM
Toggle right once to save all of the settings previously
entered.
Once the profi le has been saved
[ BATT MEMORY 1]
LiPo 7 . 4V (2S)
the "
will appear. The second line on this screen will automatically
scroll through the various parameter that have been set for
this battery profi le.
To load a preset battery profi le enter the "
screen and toggle up or down
you wish to use. Toggle and hold the joystick to the right
for three seconds and the profi le will be loaded.
once to enter the
" screen.
to change the voltage
once to enter the
"
to change the
once to set the temperature.
once to enter the
" screen.
BATT MEMORY " screen
BATT MEMORY "
to fi nd the profi le number
43