Pb - Charge Mode; Pb - Disharge Mode - HITEC X1 Pro Bedienungsanleitung

Professional Balance Charger, Discharger

9.2. Pb - Charge Mode

Before you begin charging your battery, make
sure you have read and understand all of the
warnings and safety information.
After selecting the correct battery
Pb CHARGE
0.1A 2.0V(1P)
type, if the screen does not read
" CHARGE ", toggle up or down
" CHARGE " mode.
Toggle right
Pb CHARGE
0. 7 A 2.0V(1P)
rate value will begin fl ashing.
Toggle up or down to adjust the value to the desired
rate. Follow the instructions provided with your battery
when setting the amp rate. The amp rate should be set to
1/10 of capacity.
9.3. Pb - Discharge Mode
Before you begin discharging your battery,
make sure you have read and understand all
of the warnings and safety information.
After selecting the correct battery
Pb DISCHARGE
0.1A 2.0V(1P)
type, if the screen does not read
" DISCHARGE ", toggle up
" DISCHARGE " mode.
Toggle right
Pb DISCHARGE
0. 7 A 2.0V(1P)
rate value will begin fl ashing.
Toggle up or down to adjust the value to the desired
rate. Follow the instructions provided with your battery
when setting the amp rate. The amp rate should be set to
1/10 of capacity.
to select the
once and the amp
or down to select the
once and the amp
Toggle right
Pb CHARGE
0. 7 A 12.0V(6P)
voltage rate value will begin
fl ashing. Toggle up or down
number of cells.
Toggle and hold the joystick to the right
seconds to begin charging.
Once charging has commenced, the
Pb-6 0. 4A 14. 7 0V
CHG 003:10 00029
charger will display the following
real-time information: battery type, charging current, battery
voltage, charging time and charged capactiy. When charging
is complete the X1 Pro will chime.
Toggle right
Pb DISCHARGE
0. 7 A 12.0V(6P)
voltage rate value will begin
fl ashing. Toggle up or down
number of cells.
Toggle and hold the joystick to the right
to begin discharging.
Once discharging has commenced,
Pb-6 0. 4A 14. 7 0V
DSC 003:10 00029
the charger will display the
following real-time information: battery type, charging
current, battery voltage, charging time and charged capactiy.
When charging is complete the X1 Pro will chime.
once and the
to set the voltage and
for three
once and the
to set the voltage and
for three seconds
41