Charge Master Software; Lithium Battery Meter - HITEC X1 Pro Bedienungsanleitung

10. Charge Master Software

The free "HiTEC Charge Master" software gives you unpar-
alleled ability to operate the charger through the computer.
You can monitor pack voltage, cell voltage and other data
during charging and discharging.
HiTEC Charge Master also allows you to graph process
data in real-time and you can control charging and update
the X1 Pro's fi rmware all from the software interface.
Charge Setup Screen
Allows you choose battery type and charge mode execute the process.

11. Lithium Battery Meter

The X1 Pro allows you to check a battery's total voltage, the
highest voltage, the lowest voltage and each cell's voltage.
Connect the battery in the same manner as you
would for charging.
When you power on the X1 Pro
PROGRAM SELECT
LI BATT METER
you will be at the "
" screen. Toggle up
SELECT
METER ".
42
PROGRAM
until you see "
LI BATT
Professional Balance Charger, Discharger
In order to connect the X1 Pro to the computer and use the
software, you will need a USB-A to USB Mini-B cable that
is not included in this package.
You can download your copy of the HiTEC Charge Master
software from www.multiplex-rc.de. Refer to the help fi le
in the HiTEC Charge Master software for more assistance
in using this software program.
Charge Status Screen
Monitors real time information about your battery and the charging
process.
Toggle right
4.09 4.09V 4.09V
0.00 0.00V 0.00V
screen will displaly the voltage
of each cell.
Toggle up
MAIN 12.52V
H4.190V L4.160V
and the screen will display the
total voltage, highest voltage and the lowest voltage.
once and the
or down once