Guarantee And Limitation Of Liability; Ce Conformity Declaration; Disposal Notes - HITEC X1 Pro Bedienungsanleitung

Professional Balance Charger, Discharger

1.2. Guarantee and limitation of liability

MULTIPLEX Modellsport GmbH & Co.KG does not assume
any liability for loss, damage or costs which arise through
the improper use and operation of our products, or which
are connected with such operation in any way. As far as is
legally permissible, the obligation of MULTIPLEX Modellsport
GmbH & Co.KG to provide compensation for damages, on
whatever legal basis, is limited to the invoice amount of the
quantity of MULTIPLEX Modellsport GmbH & Co.KG goods
that were directly affected by whatever incident gave rise
to the damage.
This does not apply if MULTIPLEX Modellsport GmbH & Co.KG
is obliged to accept unlimited liability in accordance with
mandatory law for deliberate or gross negligence.
Our products are covered by the currently valid statutory
guarantee regulations. If you wish to make a claim under
guarantee, please contact the model shop where you
purchased the product.
The guarantee does not cover malfunctions caused by the
following:

1.3. CE Conformity Declaration

This device has been assessed and approved in accordance
with European harmonised directives. This means that you
possess a product whose design and construction fulfi l the
protective aims of the European Community designed to
ensure the safe operation of equipment.

1.4. Disposal Notes

Electrical equipment marked with the cancelled waste bin
symbol must not be discarded in the standard household
waste; instead it should be taken to a suitable specialist
disposal system.
In the countries of the EU (European Union) electrical
equipment must not be discarded via the normal domestic
refuse system (WEEE - Waste of Electrical and Electronic
Equipment, Directive 2002/96/EG). You can take unwanted
equipment to your nearest local authority waste collection
point or recycling centre. There the equipment will be
disposed of correctly and at no cost to you.
· Improper Operation
· Maintenance that was performed incorrectly, late
or not at all, or performed by a non-authorized body
· Incorrect connections
· Use of non-original MULTIPLEX accessories
· Modifi cations / repairs that were not carried out
by MULTIPLEX or a MULTIPLEX Service Centre
· Accidental or deliberate damage
· Faults due to normal wear and tear
· Operation outside the technical specifi cations or in
connection with components from other manufacturers.
MULTIPLEX Modellsport GmbH & Co.KG
Westliche Gewerbestraße 1
D-75015 Bretten-Gölshausen
Multiplex/HiTEC Service:
+49 (0) 7252 - 5 80 93 33
The detailed CE conformity declaration can be downloaded
in the form of a PDF fi le from the Internet under
www.multiplex-rc.de. It is located in the DOWNLOADS
area.
By returning your unwanted equipment you can make an
important contribution to the protection of the environment!
27