Lithium - Discharge Mode - HITEC X1 Pro Bedienungsanleitung

Professional Balance Charger, Discharger

7.6. Lithium - Discharge Mode

If you plan to discharge your battery to reach safe storage
levels we strongly recommend that you use Storage Mode.
In very few instances should discharging become necessary
with LiPo batteries. One such instance may include preparing
a battery for disposal, in which case the battery should not
be completely discharged.
Discharging lithium chemistry batteries can
cause permanent damage to the battery and
it is not recommended for anything other than
the disposal of the battery. If you choose to
discharge your lithium batteries, make sure to
pay close attention to the minimum voltage
setting. If you want to store your battery for
a long period of time you should utilize the
storage mode charge program as this is the
safest method of storing your lithium chemistry
batteries.
See page 31 for the appropriate charging connections setup
for this operation.
First, select the correct battery
LiPo DISCHARGE
8.1A 22.2V(6S)
type by following the instructions
on page 33. Once you have set the correct battery type,
toggle up or down until you see the "
DISCHARGE " screen.
Toggle right
LiPo DISCHARGE
0.8A 22.2V(6S)
rate value will begin fl ashing.
Toggle up or down to adjust the value to the desired
rate. Follow the instructions provided with your battery
when setting the amp rate.
Toggle right
LiPo DISCHARGE
0.8A 11.1V(3S)
count value will begin fl ashing.
Toggle up or down to adjust the cell count. This will
automatically change the voltage value to the correct
setting for the selected cell count. The cell count should
exactly match the battery label.
Toggle and hold the joystick to the right
and you will see " BATTERY CHECK WAIT...
by the "
CONFIRM/CANCEL
LIPO
once and the amp
again and the cell
for three seconds
" followed
" screen.
Be sure to follow the discharging instructions provided
by the battery manufacturer. Over-discharging a battery
can severly damage the battery and may cause a fi re or
explosion.
In Discharge Mode, lithium batteries can be
discharged with or without the use of a balance
adaptor. The use of a balance adaptor is
recommended for discharging any battery
that has a balance lead.
Before you begin discharging your battery,
make sure you have read and understand
all of the warnings and safety information.
This screen displays the number
R:3SER S:3SER
CONFIRM(ENTER)
of cells you set up as "
the number of cells detected by the processor as "
both numbers are identical, you may toggle right
to confi rm and begin discharging. If the cell count does not
match, toggle left once to return to the previous screen
and carefully check the number of cells of the battery pack
before proceeding.
Once discharging has commenced,
Li3s 1.2A 12.69V
DSC 022:43 00682
the charger will display the following
real-time information: battery type/cell count, discharging
current, battery voltage, discharging time and discharged
capactiy.
During Discharging, the battery should be
placed inside a fi reproof/retardant bag and
on a fi re proof surface, away from other
combustible objects.
During discharging you may toggle
4.09 4.09V 4.09V
0.00 0.00V 0.00V
up
each individual cell. Once the battery is discharged the
screen will read " [DISCHARGE FINISHED]
charger will emit a chiming sound. Toggle left
stop discharging. You may toggle left
the discharging process to stop discharging.
" and
R
S ". If
once
once to view the voltage of
" and the
once to
at any time during
37