Operation - Abicor Binzel Tes Montageanleitung

7 Operation

7 Operation
NOTICE
• Only qualified personnel are permitted to perform work on the device or system.
• Consult the documentation for the welding components.
• Replace any damaged, deformed or worn parts.
 9 Maintenance and cleaning on page EN-21
1 Switch on the welding system and robot control.
2 Start the change procedure.
3 End the change procedure.
8 Decommissioning
NOTICE
• When decommissioning the system, ensure that the procedures for switching off the
welding components are observed.
1 Switch off the robot control.
2 Cut off the power supply.
3 Close the compressed air supply.
EN - 20 MON.0015.0 • 2020-05-19
TES