Abicor Binzel TES Montageanleitung Seite 35

TES
6 Commissioning
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly,
disassembly and repair work:
• Switch off the power source.
• Close off the compressed air supply.
• Disconnect all electrical connections.
• Switch off the entire welding system.
CAUTION
Risk of injury
Serious injuries may be caused by parts swirling around.
• When cleaning with compressed air, wear suitable protective clothing, in particular safety
goggles.
NOTICE
• The device (end switch) is preset upon delivery and must be checked for proper
functioning before initial commissioning.
• Note the following instructions:
 2 Safety on page EN-5
• Only qualified personnel are permitted to perform work on the device or system.
NOTICE
• Integration of the device as well as the electrical and pneumatic control system is the
responsibility of the customer or integrator.
MON.0015.0 • 2020-05-19
6 Commissioning
EN - 13