Designated Use; Obligations Of The Operator; Personal Protective Equipment (Ppe) - Abicor Binzel Tes Montageanleitung

TES
2 Safety
The attached safety instructions must be observed.

2.1 Designated use

• The device described in these instructions may be used only for the purpose and in the
manner described in these instructions. When doing so, please observe the operating,
maintenance and servicing conditions.
• Any other use is considered improper.
• Unauthorized modifications or changes to enhance the performance are not permitted.

2.2 Obligations of the operator

• Only the following personnel may work on the device:
• those who are familiar with the basic regulations on occupational safety and accident
prevention;
• those who have been instructed on how to handle the device;
• those who have read and understood these assembly instructions;
• those who have read and understood the chapter entitled "Safety Instructions";
• those who have been trained accordingly;
• those who are able to recognize possible risks because of their special training,
knowledge, and experience.
• Keep other people out of the work area.
• Observe the occupational health and safety regulations of the relevant country.
• Observe the regulations on occupational safety and accident prevention.
• According to DIN EN 60974-10, this device is considered class A welding equipment.
Class A welding equipment is not intended for use in residential areas with a public low-
voltage power supply system. Such use can cause electromagnetic interferences that may
result in equipment damage and malfunctions. Use the device only in industrial areas.

2.3 Personal protective equipment (PPE)

To prevent danger to the user, these instructions recommend the use of personal protective
equipment (PPE).
• This consists of protective clothing, safety goggles, a class P3 respiratory mask, protective
gloves and safety shoes.
MON.0015.0 • 2020-05-19
2 Safety
EN - 5